BETACONTROL

ADP1/L electronic calculator for fuel dispenser control

• new compact electronic calculator derived of ADP/T line with the integrated display
  (2 versions available - grey positive or blue negative LCD with the LED back-light)

• compact design

• low-cost

• error history

• thermally protected motor control

• distribution controlled via a proportional valve or a closing/throttle valve (alternatively)

Brief characteristics:

The calculator controls a fuel dispenser with one fuelling point, one nozzle per fuelling point. ADP1/L calculator technical parameters equal world standard.

ADP1/L type electronic calculator is an electronic control system for fuel distribution at the modern fuel sites. Intended for simple fuel dispensers, it is designed to decrease price in comparison with ADP1/T calculator.

ADP1/L can operate in either the standalone (manual) or the communication mode. The calculator uses communication protocol EASYCALL that is also implemented in the widely used site controllers and POSes - for instance DOMS, PetroVend and others.

Reduced price in comparison with ADP1/T achieved via reduced construction (both electrical and mechanical) resulted in missing independent calculator supply unit. Besides, the calculator requires additional external modules for some functions.
Without integrated vapour recovery control, the calculator is equipped with pulse output intended for connecting an external recovery module.
Fuel distribution valve calculator controls through an PWM output. To control the closing/throttle valve it needs adding the optional PWM/L module that we also deliver (typically for LPG dispensers with ADP1/L calculators).
IFSF communication expects the usage of an external IFSF module placed in a box attached to the DIN rail in the dispenser head together with the calculator.

Setting the calculator parameters guarantees the flexibility of the function. The parameters are compatible with the other Beta Control calculators. The calculator parameters, unit prices, electronic calibration values and the ATC can be set using the wireless keyboards over the infra-red transmission.

The calculator is on the same electronic board as the (primary) display while the electronic board size equals the size of ADP/T calculator display electronic board. Another (secondary) display may be connected to the calculator for a double-sided single fuelling point dispenser.
The displays show the process of transactions and other data important for calculator operation (setting, auto diagnostics, etc.) The displays of LCD type may be delivered in various versions (positive, blue negative, or other).

The calculator is equipped with non reset-able built-in electronic volume total register of the meter and electronic registers of volume, price and number of transactions totals per nozzle. Nozzle electronic registers may be recorded via the communication line.
In addition, an electromechanical non reset-able volume total register may be installed for each meter.

Shaft encoders used to transmit measured delivered volume from the meter to calculator electronics may be chosen as three-channel or two-channel type.

ADP1/L calculator can connect up to two customer pre-selection keyboards (one per each side in case of the double-sided single fuelling point dispenser). Customers may use the keyboard to pre-set the volume to be delivered or the total price of the fuel to be delivered.

Calculator electronics is placed together with the (primary) display on the electronic board that is mounted on dispenser mask. Every input and output connects with screw terminal connectors via cables. The used connectors are designed so that the calculators may be easily replaced in case of defect because all wires remain connected to the connectors even if these are opened.

Basic technical parameters: